Analogue U6 3D

This is my Analogue 3D model final i created this over the course of three lessons, i used foam board, double sided tape a cutting board and a scalpel to create the stand for the picture, the picture itself i created by sticking multiple different sections of portraits in a pattern to create an almost mirroring effect, i then used the scalpel to score the pictures along the lines creating weak parts in the foam board which i was able to bend to create corners and a more 3 diminutional feel. I created the stand by cutting it out of a piece of foam board and stuck it all together with double sided tape.

I used all of the off cuts and trimmed them into triangles and lots of angular shapes, I then stuck these down on the base of the stand for decoration.

I created the initial image by cutting two images into lots of triangles and arranged them to fit onto an A6 piece of foam board this created a mirroring effect between the two images.

I then used the scalpel to score along the edges of the pictures where they were connected to the foam board, this allowed me to bend the foam board along the lines to create a unique now 3D image.

Next i hung the image from the stand by piercing the top corners of the image and put thread through the holes and hooked it on the top of the stand, this left the image hanging giving it another 3D element.