3d workshop

One of our 3D workshops involved embroidery this helped me learn skills of how to stitch and create interesting elements on top of pre digitally edited images as seen in my 3D practice image.
These coloured lines which can be seen in this image are intact pieces of thread stuck onto
 adhesive foam along the angular cut outs of the image to create a element of separation and division to the image, these pieces of thread were then secured at the ends by stitching them to the external foam board.


This work shop also taught me how to incorporate physical objects into my work rather than just computer edits allowing me unique creativity to create my pieces which stand out from most.


overall this was a great workshop which enhanced my creative skills in post production of images to create much more unique work.

Comments

Post a Comment

Popular posts from this blog

After effects

Image
Adobe After Effects is a computer programme which allows you to edit images but is also create videos from the images we have taken or downloaded, we started out by de constructing an image we took from google, we used the polygonal lasso tool in photoshop CS6 to select the main sections of the image and separate them into layers, we then refined the edges to make them more accurate to the area that we were trying to select, each layer we selected we gave a name in this case it was"sky", "shard", and "plane" this helps us not to get confused while editing, we also increased the contrast saturation and brightness to make the image more visually appealing. After doing this we opened the image layers in Adobe After Effects. After opening the image in after effects we stretched the sky layer out of frame to crop it down a little to leave more image over hanging the edge so it had room  to slide across, we then transformed each image layer and selected a sta...
Read more

Lumen pinhole

Image
Pinhole photography is a method of camera-less photography where light sensitive paper is placed in a light sealed container with a roughly 0.332 mm hole pierced in it however the hole is covered with tape until exposure of the paper is desired. Materials: 35mm card disc (use compass to get correct size on all card circles when cutting them out) 60mm card disc 70mm card disc 70mm felt disc (use the 70mm card disc as a template to cut the felt) (this felt must be black or inpenitrable by light) Scissors to cut circles of card and felt compass and ruler to cut and measure the 3 circles before cutting them out of the card. Acupuncture needle duct tape (black/solid colour that is not opaque or transparent) stapler 500ml can (clean and dry) Can opener sand paper hot glue gun We created our own pinhole cameras by using our can opener to remove the top of the can leaving a cup shape we then pt duct tape around the tip to preventing sharp edges from cutting us. Next we pier...
Read more

Decay sequence resubmission

Image
A 'Decay sequence' involves taking photos of a "decaying" object, these photos are all taken from exactly the same place (using a tripod iff possible). All photos are all taken with an equal interval between them in my case this was a two minute interval between each shot I also made sure that the camera settings were identical for each shot i did this by keeping my camera in fully manual settings and focus meaning the camera couldn't try to compensate of lighting by changing the shutter speed or aperture. These images upto thousands sometimes are now stitched together and rendered, i did this in photo shop by converting my raw images to jpeg images so they were smaller images, I then imported the correctly ordered images and put them into video format and saved it. This went well however it could have gone better if I was able to make the video slower in premiere pro, this however was not possible due to how slow the software was. This also could ha...
Read more